Description of Cold Rolled Full Hard Steel Coil (CRC FH):
Cold Rolled Full Hard Unprocessed Sheet is for direct use by customers for applications that do not require any formability beyond very limited bending and/or roll forming. It is supplied directly off the cold-reduction mill without any annealing to soften the steel. Thus, the steel is highly work-hardened, and exhibits a high resistance to denting, etc., but at the same time, it exhibits only minimal ductility. It can be used to produce Galvanized coil directly.

Size Range: 0.15~2.50mm x 900--1500mm x Coil

Coil ID: 508mm/610mm